Home Efficiency Rebate Program (HOMES)

Who is Eligible

You may qualify for HOMES rebates if:

  • You live in an existing single‑family home or multifamily building.
  • Your planned upgrades will reduce energy use by at least 20 percent.
  • Your household meets the income requirements listed in the rebate tables below.
  • You work with an approved contractor once the program is active.
  • Your project began on or after August 16, 2022, and meets all federal and state requirements.
  1. Schedule a home energy assessment.
    This is required and must be completed before any upgrades are installed.
  2. Review the assessment results.
    Your contractor will model your home’s current energy use and estimate how much you can save.
  3. Select qualifying upgrades.
    Improvements must be expected to reduce energy use by at least 20 percent.
  4. Complete the upgrades with an approved contractor.
    Only contractors approved by the state will qualify once the list is published.
  5. Verify the energy savings and complete the rebate process.
    Your contractor will help document the project, so it meets program requirements.

Required Home Energy Assessment

A home energy assessment is required for all HOMES rebates. It must:

  • Be completed by an approved contractor.
  • Use a calibrated energy model that meets BPI-2400 standards.
  • Estimate your total energy savings after upgrades. Upgrades must show at least 20 percent modeled energy savings to qualify.

Eligible Products and Upgrades

HOMES rebates focus on whole‑home energy improvements, especially weatherization. Eligible upgrades include:

Air sealing

Insulation

Duct sealing

Weatherstripping, caulking, and sealing around windows and doors

ENERGY STAR® certified windows, storm windows, doors, and skylights

ENERGY STAR® qualified thermostats

LED lighting and fixtures

Low-flow water fixtures and faucet aerators


Rebate Amounts

Single Family Rebate Levels

Modeled Energy SavingsIncome LevelRebate Amount
20 – 34%Below 80% AMILesser of $6,000 or 100% of project cost
20 – 34%Between 80 – 150% AMILesser of $4,000 or 80% of project cost
20 – 34%Greater than 150% AMILesser of $2,000 or 50% of project cost
35% or greaterBelow 80% AMILesser of $12,000 or 100% of project cost
35% or greaterBetween 80 – 150% AMILesser of $8,000 or 80% of project cost
35% or greaterGreater than 150% AMILesser of $4,000 or 50% of project cost

Multifamily Rebate Levels

Modeled Energy SavingsIncome LevelRebate Amount
20 – 34%A building with at least 50% of households with incomes less than 80% AMILesser of $6,000 per dwelling unit or 100% of project cost
20 – 34%A building with at least 50% of households with incomes between 80-150% AMILesser of $4,000 or 80% of project cost
20 – 34%A building with at least 50% of households with incomes greater than 150% AMILesser of $2,000 or 50% of project cost
35% or greaterA building with at least 50% of households with incomes less than 80% AMILesser of $12,000 or 100% of project cost
35% or greaterA building with at least 50% of households with incomes between 80-150% AMILesser of $8,000 or 80% of project cost
35% or greaterA building with at least 50% of households with incomes greater than 150% AMI$4,000 per dwelling unit up to $400,000 per building

Consumer Protection Notice:
Stay Safe from Scams
A few tips to protect yourself:
– Be cautious of unexpected calls, emails, texts, online ads, or door-to-door visits about Save Energy Minnesota program, these may be scams.
– Always wait for official updates from the **Minnesota Commerce Department** before sharing personal information or responding to any offers.

Advisory No.: 2024-001
Issued: September 9, 2025
Last Updated: December 9, 2025
Expires: March 9, 2026
Version: 1.3

Scroll to Top